INPUD-A Transmission system for analog sensors 



GENERAL:
With INPUD-A data can be transferred by analog sensors over an air gap by up to 5mm with high data security. At the same time the supply of the sensor is made by an inductive coupling.

INPUD A works independently of the number of revolutions. The transmission occurs even under hardest environmental conditions reliably(dust, water, oil, etc.). INPUD-A is maintenance free because no mechanically affecting parts are used. 

Available with radial and axial mechanical housings allows the use for nearly every applicaton. 
 
APPLICATIONS: 
 Rotary indexing tables
 Test stands 
 Measuring techniques 
 Processing machines 

FEATURES:
 Compatibly to electrical and mechanical sensors
 4 undependent input / output channels 0..10V, 0/4..20mA
 Input / output polarity protected 
 Overvoltage-proof
 No moving parts 
 12 bit signal resolution

BENEFITS: 
 Easy to install
 No maintenance required 
 IP67 industrial housing
 Output short circuit proof
 Status indication over LED                                    

INPUD-B Transmission system for binary sensors



GENERAL:
The INPUD-B8 Rotary System is an intelligent system for the continuous transfer of power and up to 8 binary sensor 0..24V, (e.g. inductive, capacitive, etc.) signals from rotating sensors across a small air gap, without contact, to a stationary PLC or other control electronics. The principle work independent of its rotational speed. Data are continuously transmitted from the rotating sensors across the air gap to the stationary unit. All rotating electronics are integrated into one ring that is mounted on the rotating shaft. Designed for harsh environments the INPUD system is truly maintenance free. There are no moving parts to break down or wear out, even in dirty and oily environments.

APPLICATIONS:
 Elevating gear stores, paternoster
 Rotary indexing tables 
 Bottling machines 
 Safety monitoring 

FEATURES:
 Compatibly to electrical and mechanical sensors
 Suitable for up to eight binary pnp sensors
 SPS-compatible
 Input / output polarity protected
 Axial and radial housings available 
 No moving parts
 Status indication over LED
 Works under rough environmental condition

BENEFITS:
 Easy to install
 No maintenance required 
 IP67 industrial housing
 Output short circuit proof
 Status indication over LED   
     

INPUD-A/B Transmissionsystem for analog/binary sensors 



GENERAL:
The INPUD-A/B (Inductive Power and Data Transfer for analog and binary sensors) is a modular system used for contactless air gap transfer of power to supply a rotating ring with its integrated electronics. This part again supplies power to up to 4 analog and binary sensors (inductive, capacitive etc.), independent of the rotational speed. Data are continuously transmitted from the rotating sensors across the air gap back to the stationary unit. All rotating electrincs are integrated into one ring that is mounted on the rotating shaft. Designed for harsh environments the INPUD system ist truly maintenance free. There are no moving parts to break down or wear out, even in dirty and oily environments.


APPLICATIONS:
 Machine tool
 Rotary indexing tables, printing maschine
 Bottling machines 
 Safety monitoring 

FEATURES:
 24VDC power supply 
 Expandable up to 2/4 analog/binary sensors 
 Simple assembly of the stationary and rotary parts
 Interface 0..10V and 0/24V, pnp
 Suitable for high rotational speed 
 Status indication over LED
 Maintenance-free
 Plug and pin-to-pin compatibility to commercial sensors
 Works under rough environmental condition
 Axial and radial housing shape

BENEFITS:
 Easy to install
 No maintenance required 
 IP 67 industrial housing
 Output short circuit proof
 Status indication over LED   

INPUD-CAN120 120W Transmission system with CAN bus

INPUD-I/O Transmission system for binary sensors respectily magnetic valves

INPUD-T Transmissionsystem for temperature sensors



GENERAL:
The INPUD-T System is an intelligent system for the continuous transfer of power and up to 4 PT100 transducer signals, from rotating part across a small air gap, without contact, to a stationary unit. A firm wiring is carried out to a PLC or other control electronics. The INPUD inductive coupling system consists of a ring, a coupling head with the stationary electronics integrated. To induce power and transfer data, install the coupling head within a few mm of the ring and supply the stationary module with 24Vdc. After a few milliseconds, high signal integrity serial data is transferred across the air gap. The measured temperature values are scaled over a 0..300°  temperature range and output as a temperature proportional linear 4..20mA or 0..10V analog signal. Temperature range can be adapted to customers needs. The INPUD-T System is suitable for almost every application as the temperature data is continuously transmitted, independent of the systems rotational direction, speed or orientation. 
There are no moving parts or mechanical contact to wear out or service. 

APPLICATIONS:
 Test stands 
 Horizontal flow wrapping machines 
 Machine building 
 Process technic / plant engineering
 Centrifuges, decanter
 Calender (foil production, fleece, etc.)

FEATURES:
 24VDC power supply for preparation of PT100-thermal couple signals 
 Up to 4 independent channels 
 Reverse polarity protected
 high data security
 12 bit signal resolution
 Axial and radial housing shape
 Signal linearisation 

BENEFITS:
 Rugged against mechanical stress and thermal pollution
 Simple and fast installation
 Linear output signal (4..20mA, 0..10V) 
 Maintenance free 
 IP65 industrial housing 
 4..20mA or 0..10V interface
 Status indication over LED
 Quick amortization by very low machine break down 

SPS Coupler for the contactless power supply of magnetic valves


GENERAL: 
Magnetic valves, relays actuators on rotary indexing tables and other mobile parts can be driven contact less without sliprings. The SPS coupling unit is established in the rough use in machine tools assembly automats and rotary indexing tables. Compared with mechanical connctors or sliprings the SPS coupling unit offers substantial economic advantages.
Maintenance work is void completely.

APPLICATIONS:
 Testing technique
 Punching machine
 Processing machine 
 Factory automation

BENEFITS:
 Favourable in price and power ratio
 Maintenance free
 Easy to install
 IP67 industrial housing
 Compact structure
 Output short circuit proof